112
OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
17
18
19
21
20
16
15
16
s OPC-599 ADAPTER CABLE
13-pin, ACC connector to 7-pin + 8-pin ACC connector.
s-" CARRYING HANDLE
Convenient when carrying the transceiver.
The same as that supplied with the transceiver.
s OPC-420 SHIELD CONTROL CABLE
For the connection between transceiver and the AH-4.
s23"! IP REMOTE CONTROL SOFTWARE
To remotely control radios using the RS-BA1, "%352%
that you comply with your local regulations.
Approved Icom optional equipment is designed for
optimal performance when used with an Icom trans-
ceiver.
Icom is not responsible for the destruction or damage
to an Icom transceiver in the event the Icom trans-
ceiver is used with equipment that is not manufac-
tured or approved by Icom.
To Next Page
Loading...
Need help?
General
