Icom IC-7410

91
SET MODE
10
4"7-)$,9. $EFAULT
-ODE33"
Set the lower cut-off frequency of the transmission
passband width for your mid setting to 100, 200, 300
or 500 Hz.
4"7-)$(10. $EFAULT
-ODE33"
Set the higher cut-off frequency of the transmission
passband width for your mid setting to 2500, 2700,
2800 or 2900 Hz.
4"7.!2,11. $EFAULT
-ODE33"
Set the lower cut-off frequency of the transmission
passband width for your narrow setting to 100, 200,
300 or 500 Hz.
4"7.!2(12. $EFAULT
-ODE33"
Set the higher cut-off frequency of the transmission
passband width for your narrow setting to 2500, 2700,
2800 or 2900 Hz.
N Tone Control Set mode description (Continued)