69
MEMORY OPERATION
7
N'ENERALDESCRIPTION
The transceiver has 101 Memory channels (99 regular,
and 2 scan edges). The Memory mode is very useful
to quickly change to often-used frequencies.
While in the memory mode, all 101 Memory channels
are tunable, which means the programmed frequency
can be tuned temporarily with [DIAL].
-EMORY#HANNELS $ESCRIPTIONS
1–99 Regular Memory channels with Split frequency capability.
P1, P2
Program Scan Edge Memory channels with only Simplex capability.
Stores the scan edge frequencies for the programmed scan.
D-EMORYCHANNELCONTENTS
The following information can be programmed into
Memory channels:
s/PERATINGFREQUENCYP
s/PERATINGMODEP
s)&lLTERNUMBERP
s3PLITDATAP
s-EMORYNAMEP
s2EPEATERTONEENCODERPORTONESQUELCH/.
OFF (p. 50)
s2EPEATERTONEFREQUENCYPORTONESQUELCHFRE-
quency (p. 50)
./4%
Memory data can be erased by static electricity, elec-
tric transients, etc. In addition, they can be erased by
malfunction and during repairs. Therefore, we recom-
mend that memory data be backed up.
N-EMORYCHANNELSELECTION
D3ELECTIONINTHE6&/MODE
q Push [VFO/MEMO] to select the VFO mode.
w Push [Y] or [Z] to select a Memory channel num-
ber.
s!LL-EMORYCHANNELSINCLUDINGBLANKCHANNELSCANBE
selected.
sh
” appears when no information has been pro-
grammed into the Memory channel. (Blank channel)
e Push [VFO/MEMO] to select the Memory mode.
sh-%-/vANDCONTENTSOFTHE-EMORYCHANNELAPPEAR
D3ELECTIONINTHE-EMORYMODE
q Push [VFO/MEMO] to select the Memory mode.
w Push [Y] or [Z] to select a Memory channel.
s!LL-EMORYCHANNELSINCLUDINGBLANKCHANNELSCANBE
selected.
sh
” appears when no information has been pro-
grammed into the Memory channel. (Blank channel)
s-EMORYCHANNELSCANALSOBESELECTEDUSINGTHEMICRO-
phone [UP]/[DN] keys. In such case, the blank channels
are skipped.
While in the VFO mode
Appears if the selected Memory
channel has no information.
[VFO/MEMO] [] []
While in the Memory mode
To Next Page
Loading...
