Icom IC-7410

4
35
RECEIVE AND TRANSMIT
[DIAL][SSB][AF][MIC]
[TRANSMIT] TX indicator
“LSB” or “USB” appears
N/PERATING33"
q Select the desired band. (p. 25)
w Push [SSB] to select the LSB or USB mode.
 sWhen operating above 10 MHz, USB is selected first;
when operating below 10 MHz, LSB is selected first.
 s)FDESIREDAFTER53"OR,3"ISSELECTED HOLD DOWN
[SSB] for 1 second to select the data mode.
e Rotate [DIAL] to tune a desired signal.
 s4HE3METERINDICATESTHERECEIVEDSIGNALSTRENGTH
 s4HETUNINGSTEPCANBECHANGEDINTHETUNINGSTEPPRO-
gram mode. (p. 27)
r Rotate the [AF] control to adjust the audio to a com-
fortable listening level.
t Push [PTT] on the microphone to transmit (or
[TRANSMIT] on the transceiver).
 s4HE48INDICATORLIGHTSRED
y Speak into the microphone at your normal voice
level.
 s2OTATETHE;-)#=CONTROLTOADJUSTTHEMICROPHONEGAIN
at this step, if necessary.
u Release [PTT] to receive (or push [TRANSMIT]
again).
#ONVENIENT2ECEIVEFUNCTIONS
s0REAMPANDATTENUATORP
s4WIN0"40ASSBAND4UNINGP
s!'#!UTO'AIN#ONTROLP
s.OISE"LANKERP
s.OISE2EDUCTIONP
s.OTCHlLTERP
s63#6OICE3QUELCH#ONTROLP
#ONVENIENT4RANSMITFUNCTIONS
s3PEECH#OMPRESSORP
s6/86OICE/PERATED4RANSMITP
s4RANSMITQUALITYMONITORP
s4RANSMITlLTERWIDTHSELECTIONP
s!UDIOTONECONTROLPP