Icom IC-905 - Page 15

1-2
BASIC MANUAL
PANEL DESCRIPTION
1
1
MEMO PAD KEY
• Push to sequentially call up the contents in the
Memo Pads.
• Hold down for 1 second to save the displayed
contents into the Memo Pad.
SCAN KEY
• Push to display the SCAN SELECT screen.
• Hold down for 1 second to start the previously
selected scan.
AUTO TUNE/RX CALL SIGN CAPTURE/AFC KEY
/
• In the CW mode, pushing the key automatically
tunes the operating frequency to a close-by CW
signal. (p. 4-14)
• In the FM or DV mode, push to turn the Auto
Frequency Control function ON or OFF.
• In the DV and DD mode, hold down for 1 second
to display the RX History list.
SPEECH/LOCK KEY
• Push to announce the operating frequency or
mode.
• Hold down for 1 second to electronically lock
. (p. 3-8)
AMBIENT LIGHT SENSOR
Used to automatically adjust the display’s backlight
brightness.
L DO NOT cover the sensor.
TX INDICATOR
Lights red while transmitting.
RX INDICATOR
Lights green while receiving.
MAIN DIAL
Rotate to change the operating frequency.
Bottom panel (Controller)
You can attach a third party mounting base using
screw holes* on the bottom panel.
* AMPS hole pattern
4-M4
1/4-20UNC
38 mm (1.5 inch)
30 mm (1.2 inch)
Front panel (Controller)