Icom IC-905 - Specifications

11-1
BASIC MANUAL
10
11
11
SPECIFICATIONS
D General
• Frequency coverage (unit: MHz):
USA version
Receiver/Transmitter 144.000000 ~ 148.000000
430.000000 ~ 450.000000
1240.000000 ~ 1300.000000
2300.000000 ~ 2309.999999
2390.000001 ~ 2450.000000
5650.000000 ~ 5925.000000
EUR version
Receiver/Transmitter 144.000000 ~ 146.000000
430.000000 ~ 440.000000
1240.000000 ~ 1300.000000
2300.000000 ~ 2450.000000
5650.000000 ~ 5850.000000
L BE SURE to check your local regulations or laws to select the appropriate operating frequency.
• Operating modes: USB/LSB (J3E), CW (A1A), RTTY (F1B), AM (A3E), FM (F2D/F3E),
DV (F7W), DD (F1D), and ATV (F3F/F8W)
• Number of memory channels: 500 channels (in up to 100 groups)
• Number of program scan channels: 25 channels (2 edge frequencies in each channel)
• Number of call channels: 12 channels (2 channels in each of the 6 bands)
• Number of repeater memories: 2500
• Number of GPS memories: 300
• Antenna impedance: 50 Ω unbalanced
• Antenna connector: SMA (50 Ω) × 2 (for the 2400/5600 MHz band)
Type-N × 1 (for the 144/430/1200 MHz band)
• Power source requirement:
Controller 13.8 V DC (±15%)
• Operating temperature range:
Controller 0°C ~ 50°C, 32°F ~ 122°F
RF unit –10°C ~ +55°C, 14°F ~ 131°F
• Frequency stability: Less than ±65 ppb
(Total deviation including variations in operating temperature.)
• Frequency resolution: 1 Hz (minimum)
• Power consumption:
Receive Standby 2 A (typical)
Maximum audio Less than 3 A
Transmit Maximum power Less than 5.5 A
(When using an external DC power (13.8 V DC) and supplied control cable)
• Dimensions (projections not included):
Controller 200.0 (W) × 83.5 (H) × 82.0 (D) mm, 7.9 (W) × 3.3 (H) × 3.2 (D) in
RF unit 172.0 (W) × 87.0 (H) × 210.0 (D) mm, 6.8 (W) × 3.4 (H) × 8.3 (D) in
• Weight (approximate, without the supplied accessories):
Controller 940 g, 2.1 Ib
RF unit 3.2 kg, 7.1 lb