Icom IC-905 - Touch Screen Display

1-5
BASIC MANUAL
1
PANEL DESCRIPTION
Touch screen display
1TX STATUS INDICATOR
Displays the transmit status.
• is displayed while transmitting.
• (with a dotted line) is displayed when the
selected frequency is outside of the band edge
frequency range. (p. 3-6)
• Displayed in orange when the transceiver is in
the Terminal mode.
• (Grayed out) is displayed when
transmission is inhibited.
• In the DD mode, is displayed when “TX
INHIBIT” is set to ON.
2LMT ICON
 Displayedifthepowerampliertemperature
becomes extremely high, and the Protection
function is activated after transmitting continuously
for a long period of time.
3INTERNAL GATEWAY
Displays the communication status while using the
Internal Gateway function.
4USB CONNECTION INDICATOR
Displayed when an external USB device is
connected through a USB cable.
5M1~M8/T1~T8 ICONS
• “M1” ~ “M8” is displayed when “External Keypad”
on the CONNECTORS screen is set to “ON,” and
you are using the Memory Keyer function.
• “T1” ~ “T8” is displayed when using the Voice TX
memory.
6PICTURE SHARE ICON
Displayed when the Share Pictures function is ON.
7GPS ICON (p. 7-1)
Displays the status of the GPS receiver.
Touch the icon to display the GPS INFORMATION
screen.
8GPS ALARM ICON
Displayed when the GPS Alarm function is ON.
9NETWORK CONTROL ICON
Displayed while accessing the transceiver using the
optional RS-BA1 (compatible in the near future), for
Remote control operation.
 VOICE RECORDER ICONS z/󰿯
Displayed while recording or pausing using the
Voice recorder.
 SD CARD ICON (p. 6-1)
Displayed when an SD card is inserted, and blinks
while accessing the card.
 CLOCK READOUT (p. 9-1)
Displays the current local time.
Touch the readout to display both the current local
time and UTC time.
 FUNCTION INDICATOR FOR MULTI-FUNCTION
CONTROL (p. 1-8)
Displays the function that is assigned to .
 RIT/∂TX ICON
Displayed when the Receive Increment Tuning
(RIT) (p. 4-2) or ∂TX function is ON.
 RIT/∂TX/SPLIT/DUPLEX FREQUENCY
READOUT
• DisplaystheshiftoffsetfrequencyfortheRITor
∂TX functions.
• Displays the shift frequency for the Duplex
function or the split frequency.
 
Displayed while the Auto Frequency Control (AFC)
function or the 1/4 Tuning function is ON.
1
2 3 4 5 6 7 8 9    


