Icom IC-905 - Operating ATV

1-6
BASIC MANUAL
PANEL DESCRIPTION
1
1
Touch screen display
 MODE INDICATOR
(p. 3-2)
Displays the selected operating mode.
 IF FILTER INDICATOR (p. 4-6)
 DisplaystheselectedIFlternumber.
L A dot “·” is displayed on the IF Filter Indicator when
you change the IF passband width.
 PREAMPLIFIER/ATTENUATOR ICONS (p. 4-1)
 DisplayedwhenoneofthePreampliers(P.AMP)
or the Attenuator (ATT) is ON.
 NOTCH INDICATOR (p. 4-7)
Displayed when the Auto Notch (AN) or Manual
Notch (MN) function is ON.
 NOISE BLANKER/TONE/DIGITAL SQUELCH
ICONS (p. 4-8)
Displayed when the Noise Blanker (NB), tone, or
digital squelch functions is ON.
 QUICK TUNING ICON (p. 3-3)
Displayed when the Quick Tuning Step function is
ON.
L Displayed above the 1 MHz digit when the 1 MHz Step
Tuning function is ON.
P NOISE REDUCTION/AUTO TUNE ICONS

Displayed when the Noise Reduction (NR) or Auto
Tuning function is ON.
Q EMR/BK/AUTO REPLY/PACKET LOSS ICONS
Displayed when the Enhanced Monitor Request
(EMR), Break-in (BK), Automatic Reply ( )
function is ON, or “L” is displayed when packet loss
has occurred.
R AGC ICON (p. 4-4)
Displayed while the Auto Gain Control (AGC) is ON.
S VFO/MEMORY ICONS (p. 3-1)
Displays “VFO A” or “VFO B” when the VFO
mode is selected, and displays “MEMO” when the
Memory mode is selected.
T MEMORY CHANNEL READOUT
Displays the selected memory channel number.
U SELECT MEMORY CHANNEL ICON
Indicates that the displayed memory channel is
assigned as a Select Memory channel (★1~★3).
V FREQUENCY READOUT
Displays the operating frequency.
X MEMORY NAME
Displays the Memory name, if entered.
Y MULTI-FUNCTION METER (p. 3-10)
Displays various values and levels, depending on
the function that you selected.
Z RF GAIN ICON (p. 3-9)
Displayed when the RF gain is reduced.
[ OVF ICON (p. 3-9)
Displayed when an excessively strong signal is
received.
¥ SPEECH COMPRESSOR ICON (p. 4-10)
Displayed when the Speech Compressor function is
ON.
] BK-IN/F-BKIN/VOX INDICATORS (p. 4-13)
Displayed when the Semi Break-in (BK-IN), Full
Break-in (F-BKIN), or VOX function is ON.
^ SPLIT/DUPLEX/REPEATER MODE ICONS
Displayed when the Split or Duplex (DUP–/DUP+)
function is ON, or “RPS” is displayed while using
the Repeater Simplex mode (RPS) in the DD mode.

     P Q R
¥
]
^
Y
[
Z
V
S
U
T
X