Icom IC-905 - Temporary Skip function

8-12
BASIC MANUAL
8
SET MODE
The call log contents are shown below:
Contents Example Descriptions
TX/RX TX RX Transmission and reception
Date 2/28/2023 13:51:48 2/28/2023 13:51:48 Date and time the call was started.
 438.010000 438.010000 Operating frequency
Mode DV DV
Operating mode
( USB/USB-D/LSB/LSB-D/CW/CW-R/RTTY/RTTY-R/AM/AM-D/

My Latitude 34.764667 34.764667
Your latitude (unit: degrees)

My Longitude 135.375333 135.375333
Your longitude (unit: degrees)

My Altitude 50.5 50.5 Your altitude (unit: meters) Records to one decimal place.
 20% (Blank) TX output power level
S meter (Blank) S0 The relative signal strength of the receive signal (in 16 levels)
RPT Call Sign JP3YHJ JP3YHJ A Repeater call sign (DV mode only)
TX Call Sign CQCQCQ (Blank) TX Call sign (DV mode only)
RX Call Sign (Blank) JA3YUA A/905 RX Call sign/Note (DV mode only)
RX Latitude (Blank) 34.764667
Caller’s latitude, if sent. (unit: degrees)

Records only when you receive in the DV mode.
RX Longitude (Blank) 135.375333
Caller’s longitude, if sent. (unit: degrees)

Records only when you receive in the DV mode.
RX Altitude (Blank) 30.5
Caller’s altitude, if sent. (unit: meters)
Records only when you receive in the DV mode.