8-19
BASIC MANUAL
SET MODE
8
8
»
SET > Display
RX Position Display Timer (Default: 10sec)
Sets the RX position data’s time period to display in a
dialog.
• 5/10/15/30sec: Displays the caller’s position for this
set period of time.
• Hold: Displays the caller’s position until
you operate the transceiver.
Reply Position Display (Default: ON)
Selects whether or not to display the caller’s position
when it is included in the Auto Replay signal.
•
• ON: Automatically displays the caller’s position.
RX Picture Indicator (Default: ON)
Selects whether or not to display the RX Picture
Indicator when a picture is included in the received
signal.
•
included in the received signal.
• ON: The indicator is displayed when a picture is
included in the received signal.
L
is not displayed, even if a picture is included in the
received signal.
DV RX Backlight (Default: ON)
In the DV mode, this function turns ON the screen
while displaying the calling station’s call sign or a
received message.
•
• ON: The screen automatically turns ON when
displaying the calling station’s call sign or
a received message. The screen stays ON
while the call sign or message is scrolling.
TX Call Sign Display (Default: Your Call Sign)
Selects whether or not to display My or Your call sign
while transmitting.
•
• Your Call Sign: Displays and scrolls the call sign of
the target station.
• My Call Sign: Displays and scrolls your own call
sign.
L When “Your Call Sign” is selected, and if the call sign and
name of the caller station is programmed in your memory,
the programmed name is displayed after the call sign.
Scroll Speed
Sets the scrolling speed of the message, call sign,
or other text, that are displayed on the controller’s
Opening Message (Default: ON)
Selects whether or not to display the opening
message at power ON.
Power ON Check (Default: ON)
and the power source voltage at power ON.
L When the external DC power source voltage is above
15.6V, “HI Voltage” is displayed.
»
SET > Display > Display Unit
Latitude/Longitude
Selects the format to display the latitude and the
longitude.
Altitude/Distance (Default: ft/mi)
L
transceiver version.
Selects the format to display the distance and
elevation.
Speed (Default: mph)
L
transceiver version.
Selects the format to display the speed.
Temperature
L
transceiver version.
Selects the format to display the temperature.
Barometric (Default: inHg)
L
transceiver version.
Selects the format to display the barometric pressure.
Rainfall (Default: inch)
L
transceiver version.
Selects the format to display the amount of rainfall.
Wind Speed (Default: mph)
L
transceiver version.
Selects the format to display the wind speed.
To Next Page
Loading...
