8-18
BASIC MANUAL
8
SET MODE
RX Call Sign Display (Default: Normal)
In the DV mode, selects whether or not to display the
call sign and the message of the caller station when a
call is received.
•
sign and message.
• Normal: The caller station’s call sign and message
automatically scroll once, and then
disappear.
• RX Hold: The caller station’s call sign and message
automatically scroll once, and then the
call sign is displayed on the controller’s
display until the signal disappears.
• Hold: The caller station’s call sign and message
automatically scroll once, and then the
call sign is displayed on the controller’s
display until the signal disappears.
When the signal disappears, the call sign
and the message are each repeatedly
displayed for 2 seconds.
L When “Normal,” “RX Hold,” or “Hold” is selected, and if
the call sign and name of the caller station is programmed
in your memory, the programmed name is displayed after
displaying the call sign.
RX Position Indicator (Default: ON)
Selects whether or not to display the indicator when
position data is included in the signal received in the
DV mode.
•
position data is included in the received
signal.
• ON: The indicator is displayed when the position
data is included in the received signal.
L
is not displayed, even though position data is included in
the received signal.
RX Position Display (Default: ON)
Selects whether or not to display in a dialog when the
caller station’s position data is included in the signal
received in the DV mode.
•
• ON: When the caller station’s position data is
included in the signal, its data is displayed in
a dialog.
L The time period to display the dialog depends on the “RX
Position Display Timer” setting.
Display
»
SET > Display
LCD Backlight
Sets the LCD backlight brightness.
L When “(Auto Adjusting)” is displayed to the right of the
screen title, the backlight brightness is automatically
adjusted using the ambient light sensor. Touching [Auto
L DO NOT cover the sensor when the Auto Adjust function
is ON.
Screen Saver (Default: 60min)
Sets the Screen Saver function.
the screen when no operation is performed for the
preset period of time.
Screen OFF [POWER] Switch (Default: ON)
pushing
.
•
Pushing
• ON: Pushing
L , keys and
dials are also locked except for pushing
and
rotating
.
L When both “Screen Capture [POWER] Switch” and
“Screen Capture.”
Meter Peak Hold (Default: ON)
Multi-func. Meter Voltage Display (Default: V)
Selects the voltage meter displayed on the Multi-
function meter.
• DC IN: Displays the voltage of the external power
source.
• V
Memory Name (Default: ON)
Turns the Memory name display in the Memory mode
Group Name Popup (Default: ON)
Selects whether or not to display the group name
when you change the memory channel group.
To Next Page
Loading...
