Icom IC-905 - Page 91

13-5
BASIC MANUAL
CONNECTOR INFORMATION
13
13
D [REF OUT 10 MHz/-10 dBm]
Outputs a 10 MHz signal as a reference
frequency signal.
RF unit
D [GPS ANT]
Connect a supplied GPS antenna.
Type SMA
• Input impedance: 50 Ω (unbalanced)
• Output voltage: 3.3 V
D [144/430/1200 MHz ANT]
Connect an antenna for the 144 MHz,
430 MHz, and 1200 MHz bands.
Type N
• Input/Output impedance: 50 Ω (unbalanced)
D [2400 MHz ANT]
Connect an antenna for the 2400 MHz
band.
• Input/Output impedance: 50 Ω (unbalanced)
Type SMA
D [5600 MHz ANT]
Connect an antenna for the 5600 MHz
band.
• Input/Output impedance: 50 Ω (unbalanced)
Type SMA
• Output frequency: 10 MHz
• Output impedance: 50 Ω (unbalanced)
• Output level: –10 dBm (approximate)
Type BNC