8
BASIC OPERATION
4
Selecting a channel
Choose the appropriate channel group for your operating
area, and then select the desired channel.
Selecting a channel group ❏
Push q [CH/WX] to exit the WX group if necessary.
Hold down w [U/I/C] (CH/WX) for 1 second to change the
channel group. Repeat to advance to the next group.
•Theselectablechannelgroupsdiffer,dependingonthe
transceiver version.
For USA, EXP and CHN versions
For UK and AUS versions
For HOL version
❑ Selecting a regular channel
➥ Push [Y] or [Z] to select a channel.
•“DUP” appears for duplex channels.
•“A” appears for simplex channels.
NOTE: YoucannottransmitonChannel70.
U.S.A. channels
International channels
Canadian channels
Hold down
for 1 second
International channels
Hold down
for 1 second
U.S.A. channels
International channels
Hold down
for 1 second
ATIS channels
Duplex channel is selected.
Simplex channel is selected.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
