Icom IC-M25

20
7
SET MODE
Set mode items (Continued)
Automatic backlighting ❏ “A_bL”
This function is convenient for the operation in low light. The
backlight can be turned ON or OFF.
•Thebacklightisautomaticallyactivatedwhenyoupushanykey
other than [PTT].
•ThebacklightisautomaticallyturnedOFFafter5secondsof
inactivity.
LCD contrast setting ❏ “Lcdc”
Set the LCD contrast level to High or Low.
The LCD contrast level has little effect during indoor use.
Power Save function ❏ “P_SA”
The Power Save function reduces current drain by
periodically turning OFF the receiver circuit.
•OFF: ThefunctionisturnedOFF.
•ON: Whennosignalisreceived,andnooperationis
performed for 5 seconds, the receiver circuit is
periodically turned OFF.
Backlightng ON (default)
Backlighting OFF
Push
High contrast (default)
Low contrast
Push
Power Save ON
(default)
Power Save OFF
Push