Icom IC-M25

18
7
SET MODE
Set mode items
Beep Tone function ❏ “bEEP”
Turn the key touch beep sound ON or OFF.
•OFF: Forsilentoperation.
•ON: Abeepsoundswhenakeyispushed.
Weather Alert function ❏ “ALrt”
(For USA, EXP, CHN and AUS versions)
When this function is turned ON and the transceiver detects
a weather alert tone, the “WX
” icon blinks and a beep
sounds. (The blinking stops when another key is pushed.)
The currently selected weather channel is monitored even
while receiving another channel (when the Power Save
function is ON) or during a scan.
Priority Scan function ❏ “Prio”
(Not available in the HOL version)
The transceiver has 2 scan types — “Normal” and “Priority.”
•OFF:Anormalscan,whichsearchesallFavoritechannels
in the selected channel group.
•ON: Apriorityscan,whichsequentiallysearchesall
Favorite channels while monitoring Channel 16.
Scan resume timer ❏ “S_ti”
(Not available in the HOL version)
Select a scan resume timer option.
•OFF: Whenasignalisreceived,thescanpausesonthe
channel until the signal disappears.
•ON: Whenasignalisreceived,thescanpausesonthe
channel for 5 seconds, and then resumes.
Push
Key touch beep is ON
(default)
Key touch beep is OFF
Weather alert is OFF
(default)
Weather alert is ON
Push
Push
Normal scan (default*) Priority scan
*Default value differs, depending on the transceiver version.
Scan resume timer OFF
(default)
Scan resume timer ON
Push