Icom IC-M25

26
ATIS CODE (For only the HOL and FRG versions)
10
The10-digitATIScodecanbesetandconrmed.
Depending on the dealer setting:
• The ATIS code setting may not be necessary.
•Thecodecanbesetonlyonetime.
Setting the ATIS code ❏
Turn OFF the power. q
While holding down w [16/C], push [
].
 •EnterstotheATISCodeSettingmode.
Push e [Y] or [Z] to select the
number for the first digit of the ATIS
code.
Push r [CH/WX] to select the next
digit, and then push [Y] or [Z] to
select a number.
 •Pushing[VOL/SQL] selects the
previous digit.
Afterthe10thdigithasbeeninput, t
push [Hi/Lo] to store the code.
 •Thecodenumberstopsblinking.
 •Push[16/C] to return to the normal
operating mode.
ATIS code confirmation ❏
(Can be performed only when the ATIS code has been programmed.)
Turn OFF the power. q
While holding down w [16/C], push [
] to enter the ATIS
code confirmation mode.
 •Thedigitnumberandthestoredcodenumberappear.
 •Push[CH] to select the next digit, push [VOL/SQL] to select
the previous digit.
Push e [16/C] to exit the ATIS Confirmation mode.
First digit blinks
Selected number blinks
Next digit blinks
Entered ATIS code
Push
to scroll