Icom IC-M25

14
SCAN OPERATION (All except the HOL version)
5
Scan types
You can find ongoing calls by scanning the Favorite channels.
Before starting a scan, you need to:
•SetthedesiredchannelsyouwanttoscanasFavorite
channels (Page 15). (Only Favorite channels are scanned.)
•Setthedesiredscantypeto"Normal(default)"or"Priority"
in the Set mode (Page 18).
PRIORITY SCAN
A priority scan sequentially searches through all Favorite
channels while also monitoring Channel 16.
When a signal is received:
• On Channel 16
The scan pauses until the signal on Channel 16 disappears.
• On a channel other than Channel 16:
The scan switches to Dualwatch, until the signal
disappears.
NORMAL SCAN
A normal scan sequentially searches through all Favorite
channels. However, Channel 16 is not checked unless it is
set as a Favorite channel.
*For USA, EXP, CHN and AUS versions.
When the Weather Alert function is activated,
the previously selected weather channel is also scaned.
Ch 01
Ch 02
Ch 03
Ch 04
Ch 05
WX*
Ch 16
*For USA, EXP, CHN and AUS versions.
When the Weather Alert function is activated,
the previously selected weather channel is also scaned.
Ch 01
Ch 02
Ch 03
Ch 04
Ch 05
WX*