Icom IC-M330

5
PANEL DESCRIPTION
2
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Channel/Weather channel
CH/WX
(p. 10)
Push to select regular channels or Weather channels.
L The Weather channel is for only the USA and Australian
versions.
CHAN
is displayed for other versions.
L While the Call channel or Channel 16 is displayed, push this key
to return to the regular channel mode.
Low
LO/DX
(For only the USA and Australian versions.)
Push to turn the Attenuator ON or OFF.
AquaQuake
AQUA
(p. 14)
Hold down to turn ON the AquaQuake function to clear
water from the speaker grill.
Favorite channel

(p. 16)
Push to set or release the displayed channel as a Favorite
channel.
Channel Name
NAME
(p. 14)
Push to edit the name of the displayed channel.
Backlight
BKLT
(p. 12)
Push to display the backlight brightness adjustment screen.
L Whileintheadjustmentmode,push[▲]/[▼][◄]/[►]orrotate
[DIAL] to adjust the brightness of the display and keys' backlight
to between 1 and 7, or OFF.
LOG
LOG
(p. 38)
Push to display the received call log or distress message log.
D Software key functions
Distress Call
DISTRESS
(p. 22)
Push to display the “Distress” screen to select the nature of
distress, then to make a call.
L
DTRS
is displayed in the Multiple-task mode. (For only the USA
version)
NEVER MAKE A DISTRESS CALL IF YOUR SHIP OR A PERSON
IS NOT IN AN EMERGENCY. A DISTRESS CALL SHOULD BE
MADE ONLY WHEN IMMEDIATE HELP IS NEEDED.
Other DSC
OTHER DSC
(p. 24)
Push to compose an Individual call, Group call, All Ships call
or a Test call.
L
OTH
is displayed in the Multiple-task mode. (For only the USA
version)
Task
TASK
(For only the USA version) (p. 40)
Displayed only in the Multiple-task mode. Push to display
the task list.
Scan
SCAN
(p. 15)
Push to start or stop a Normal or Priority scan.
Dualwatch/Tri-watch
DW
/
TW
(p. 17)
Push to start or stop Dualwatch or Tri-watch.
High/Low
HI/LO
(p. 6)
Push to set the output power to high or low.
L Some channels are set to only low power.