Icom IC-M330

33
DSC OPERATION
7
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■ Receiving DSC calls (other)
ThetransceiverreceivesthefollowingtypesofDSCcalls.
• Individual call (p. 33)
• Individual Acknowledgement call (p. 26)
• Group call (p. 34)
• All Ships call (p. 35)
• Position Request call (p. 36)
• Test call (p. 37)
• Test Acknowledgement call (p. 38)
L The receivable call types may differ, depending on the version or
presetting.
D Receiving an Individual call
When an Individual call is received:
• The alarm sounds.
• “RCVD INDIVIDUAL” is displayed.
1. Push
ALARM OFF
to turn OFF the alarm.
2. Pushthesoftwarekeybelowthenextoperation.
IGN
(Ignore)
• Ignores the call and returns to the operating screen.
• The call is saved in the DSC Log.
• “
” blinks continuously until you display the call
message.
ACPT
(Accept)
• Accepts the call.
• The assigned channel is
automatically selected.
• The call is saved in the DSC Log.
• Thereceivedcall’sinformationis
displayed.
• Pushthesoftwarekeytoselectthe
Acknowledgementoption.
ABLE
(Able to comply)
• SendsanIndividualAcknowledgementcallrightaway.
• The assigned channel is automatically selected.
• After sending, [RESEND] to resend.
• The call is saved in the DSC Log.
NOTE:IftheAutoACKfunctionissetto“Auto(Unable)”
theAcknowledgement“UnabletoComply”isautomatically
senttothecallingstationwhenthecallisreceived.(p.42)
L FortheUSAversion,thisfunctionissetto“Auto(Able)”by
default.
ABLE
(Able to Comply): SendsanAcknowledgementcall
withoutanychanges.
UNABLE
(Unable to Comply): SendsanAcknowledgementbut
you cannot communicate.
NEW CH
(Propose New CH):SendsanAcknowledgementcall
but on another channel. Assign
thechannelbypushing[▲]or
[▼].