Icom IC-M330 - DSC Operation; DSC Address ID Management

18
New2001
7
DSC OPERATION
■ DSC address ID
D Entering an Individual ID
You can enter a total of 60 Individual IDs, and assign names
to them of up to 10 characters.
1. Display the “INDIVIDUAL ID” screen.
[MENU] > DSC Settings > Individual ID
• “No ID” is displayed if no ID is entered.
2. Push
ADD
.
• “The Individual ID” entry screen is displayed.
3. Enter an Individual ID.
TIP:
• Selectanumberusing[◄]and[►].
• Push [ENT] to set the selected number.
• Select“←”or“→,”orrotate[DIAL]tomovethecursor.
NOTE:Therstdigitisxedas“0”foraGroupID.
Thersttwodigitsarexedas“0”foranycoaststation
ID.
4. Push
FIN
to start entering the name.
TIP:
• Push
!$?
to use characters, and select
ABC
to use
numbers and letters.
• Selectcharactersorspaceusing[▲]/[▼]/[◄]/[►].
• Select“◄”or“►”toscroll.
• Push [ENT] to enter the selected character.
• Select“←”or“→,”orrotate[DIAL]tomovethecursor.
5. After entering, push
FIN
to save, and return to the
previous screen.
• The entered name is displayed.