Icom IC-M505 - MMSI Code Check

16
6
DSC OPERATION
■ MMSI code check
The 9-digit MMSI (DSC self ID) code can be checked.
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select “Set up,” p u s h
[CHANNEL•ENTER].
--DSC Menu--
Select Item
Position Report
Polling Request
Received Calls
Distress Setting
˘Set up
Exit
e Rotate [CHANNEL] to select “MMSI Check,” push
[CHANNEL•ENTER] .
--DSC Menu--
Set up
DEL:Group ID
Offset Time
˘MMSI Check
Auto ACK
NMEA Output
Exit
r Check the 9-digit MMSI (DSC self ID) code.
--DSC Menu--
MMSI Check
123456789
<CLR ˘ Exit>
t Push [CLR] or rotate [CHANNEL] to select “Exit,” push
[CHANNEL•ENTER].
 •ReturnstotheDSCmenu.
 •Repeatagaintoreturntothenormaloperationcondition.