Icom IC-M505 - Group ID Management

19
6
DSC OPERATION
6
D Programming Group ID
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select “Set up,” p u s h
[CHANNEL•ENTER].
--DSC Menu--
Select Item
Position Report
Polling Request
Received Calls
Distress Setting
˘Set up
Exit
e Rotate [CHANNEL] to select “Add:Group ID,” push
[CHANNEL•ENTER] .
--DSC Menu--
Set up
Add:INDV ID
˘Add:Group ID
DEL:INDV ID
DEL:Group ID
Offset Time
MMSI Check
r Rotate [CHANNEL] to s et the group ID and ID name.
 •ThegroupIDisauniquenumberthatyoucreateforyourgroup.
The ID name is an associated text name for that group.
 •Push[16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectively.
 •Push[CLR] to cancel and return to the set up menu.
 • “Full ID” appears when 100 DSC address IDs are already set.
 •Afterenteringan8-digitIDcode,push[CHANNEL•ENTER] or
[16•C] to enter a 10-character ID name.
 •1stdigit‘0’isxedforagroupID.
--DSC Menu--
Add:Group ID
Input 8 digits
0________
Input name
_________
<CLR˘Exit / ENT˘OK>
t After inputting, push [CHANNEL•ENTER] to program.
y Push [CLR] or rotate [CHANNEL] to select “Exit,” push
[CHANNEL•ENTER].
 •ReturnstotheDSCmenu.
 •Repeatagaintoreturntothenormaloperationcondition.