Icom IC-M505 - Hailer Operation

49
6
DSC OPERATION
6
D NMEA Output
Select an NMEA Output function from OFF, All Station or
List Station.
When receiving position acknowledgment, the transceiver
outputs it to the external equipment via the NMEA connector.
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select “Set up,” p u s h
[CHANNEL•ENTER].
--DSC Menu--
Select Item
POS Report Reply
Polling Request
Polling Reply
Received Calls
Distress Setting
˘Set up
e Rotate [CHANNEL] to select “NMEA Output,” push
[CHANNEL•ENTER]
.
--DSC Menu--
Select Item
DEL:INDV ID
DEL:Group ID
Offset Time
MMSI Check
Auto ACK
˘NMEA Output
r Rotate [CHANNEL] to s elect the NMEA Output function
from OFF, All Station or List Station.
 •ListStation:Outputsthepositiondatafromthespecifiedves-
sels listed on the DSC individual ID screen.
 •AllStation :Outputsthepositiondatafromallvessels.
 •OFF :Does not output any positiondatato external
equipment.
--DSC Menu--
NMEA Output
˘List Station
All Station
OFF
<CLR˘Exit / ENT˘OK>
t Push [CHANNEL•ENTER] to set the condition.
 •Push[CLR] to cancel and return to the set up menu.