Icom IC-M505 - Other Functions and Set Mode; Intercom Operation

47
6
DSC OPERATION
6
■ DSC Set mode
D MMSI code check (See page 16.)
D Add Individual ID/Group ID (See pages 17, 19.)
D Delete Individual ID/Group ID (See pages 18, 20.)
D Offset time
This item sets the offset time from the UTC (Universal Time
Coordinated) time.
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select “Set up,” and push
[CHANNEL•ENTER].
--DSC Menu--
Select Item
POS Report Reply
Polling Request
Polling Reply
Received Calls
Distress Setting
˘Set up
e Rotate [CHANNEL] to select “Offset Time,” push
[CHANNEL•ENTER].
--DSC Menu--
Select Item
Add:INDV ID
Add:Group ID
DEL:INDV ID
DEL:Group ID
˘Offset Time
MMSI Check
r Set the offset time from the UTC (Universal Time Coordi-
nated) time by rotating [CHANNEL].
 •Push[16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectively.
 •Push[CLR] to cancel and return to the set up menu.
--DSC Menu--
Input Offset Time
+12:00
<CLR˘Exit / ENT˘OK>
--DSC Menu--
Input Offset Time
00:00
<CLR
˘
Exit / ENT
˘
OK>
No offset time (default)
+12 hours
t Push [CHANNEL•ENTER] to program and to return to
the set up menu.