Icom IC-M505

48
6
DSC OPERATION
D Automatic acknowledgement
This item sets the automatic acknowledgement function to
ON or OFF.
When a position request, position report or polling request
call is received, the transceiver automatically transmits a po-
sition request reply, position report reply or polling reply call,
respectively.
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select “Set up,” p u s h
[CHANNEL•ENTER].
--DSC Menu--
Select Item
POS Report Reply
Polling Request
Polling Reply
Received Calls
Distress Setting
˘Set up
e Rotate [CHANNEL] to select “Auto ACK,” push
[CHANNEL•ENTER]
.
--DSC Menu--
Select Item
Add:Group ID
DEL:INDV ID
DEL:Group ID
Offset Time
MMSI Check
˘Auto ACK
r Rotate [CHANNEL] to turn the automatic acknowledge-
ment function ON or OFF
.
--DSC Menu--
Auto ACK
˘ON
OFF
<CLR˘Exit / ENT˘OK>
t Push [CHANNEL•ENTER] to set the condition.
 •Push[CLR] to cancel and return to the set up menu.