Icom IC-M505 - DSC Address ID Management

17
6
DSC OPERATION
6
■ DSC address ID
A total of 100 DSC address IDs can be programmed and
named with up to 10 characters.
D Programming Individual ID
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select “Set up,” p u s h
[CHANNEL•ENTER].
--DSC Menu--
Select Item
Position Report
Polling Request
Received Calls
Distress Setting
˘Set up
Exit
e Rotate [CHANNEL] to select “Add:INDV ID,” push
[CHANNEL•ENTER] .
--DSC Menu--
Set up
˘Add:INDV ID
Add:Group ID
DEL:INDV ID
DEL:Group ID
Offset Time
MMSI Check
r Rotate [CHANNEL] to s et the individual ID and ID name.
 •Push[16•C] or [DIAL•DUAL/GRP] to move the cursor forward
or backward, respectively.
 •Push[CLR] to cancel and return to the set up menu.
 • “Full ID” appears when 100 DSC address IDs are already set.
 •Afterinputtingthe9-digitMMSInumber,push[CHANNEL•
ENTER] or [16•C] to enter a 10-character ID name.
--DSC Menu--
Add:Individual ID
Input 9 digits
_________
Input name
_________
<CLR ˘ Exit / ENT˘OK>
t After inputting, push [CHANNEL•ENTER] to program.
y Push [CLR] or rotate [CHANNEL] to select “Exit,” push
[CHANNEL•ENTER].
 •ReturnstotheDSCmenu.
 •Repeatagaintoreturntothenormaloperationcondition.