Icom IC-M73 - Set Mode - Noise Cancel and Bass Boost; RX and TX Noise Cancel Functionality; RX and TX Bass Boost Functionality

29
8
SET MODE
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D RX Noise Cancel function “ ”
Set the Noise Cancel function for reception. The function may not be
available, depending on the transceiver version.
• OFF : Turns OFF the function.
• 1 : The Noise Cancel function reduces random noise components
in the received signal to approximately one half.
• 2 : The Noise Cancel function reduces random noise components
in the received signal to approximately one third.
• 3 : The Noise Cancel function reduces random noise components
in the received signal to approximately one tenth.
Push
RX noise cancel
OFF (default)
RX noise cancel 3
D TX Noise Cancel function “ ”
Set the Noise Cancel function for transmission. The function may not
be available, depending on the transceiver version.
• OFF : Turns OFF the function.
• ON : The Noise Cancel function reduces random noise compo-
nents in the transmitted signal to one third.
Push
TX noise cancel
OFF (default)
TX noise cancel ON
D RX bass boost function “ ”
Set the bass boost function for reception.The function may not
be available, depending on the transceiver version.
• OFF : Turns OFF the function.
• ON : The RX bass boost function boosts the bass level of the re-
ceive audio tone.
Push
RX bass boost
OFF (default)
RX bass boost ON
D TX bass boost function “ ”
Set the bass boost function for transmission. The function may
not be available, depending on the transceiver version.
• OFF : Turns OFF the function.
• ON : The TX bass boost function boosts the bass level of the trans-
mit audio tone.
Push
TX bass boost
OFF (default)
TX bass boost ON