Icom IC-M73 - Set Mode; Automatic Recording Threshold Level

New2001
30
8
SET MODE
New2001
D Automatic recording threshold level
“
”
Set the automatic recording threshold level. The function may
not be available, depending on the transceiver version.
• 1 : Set the threshold level to shallow. Weak signals will automatically be
recorded into memory.
• 2 : Set the threshold level to mid.
• 3 : Set the threshold level to deep. Weak signals will not automatically
be recorded into memory.
Push
Automatic recording
threshold level 2 (default)
Automatic recording
threshold level 3