New2001
50
4
D-STAR OPERATION
4
D-STAR OPERATION
D Requesting repeater information
When you send the repeater information command, an ID
message is sent back.
Touch [DR]. q
Check whether or not “TO” is selected. w
• If “TO” is not selected, touch the “TO” eld.
Touch the “TO” field. e
• Opens the “TO SELECT” screen.
Touch “Reflector.” r
• Opens the “REFLECTOR” screen.
Touch [ t √] to select the next page.
Touch “Repeater Information.” y
• The transceiver returns to the DR screen.
• “Repeater Information” and “I” are displayed in “TO.”
Hold down [PTT] to send the repeater information com- u
mand.
• The LED1 on the microphone lights red.
Release [PTT] to hear the repeater ID message. i
To Next Page
Loading...
