Icom ID-5100E

71
7
MENU SCREEN
New2001 New2001
QSO/RX Log Sets the QSO/RX History Log options.
QSO Log
*
1
OFF or ON Selects to make a communication log on the SD
card, or not.
RX History Log *
1
OFF or ON Selects to make a DV mode's receive history log on
the SD card, or not.
CSV Format
Separator/Decimal Sep [,] Dec [.]
*
2
, Sep [;] Dec [.] or
Sep [;] Dec [,]
Selects the separator and the decimal character for
the CSV format.
Date yyyy/mm/dd, mm/dd/yyyy
*
2
or dd/
mm/yyyy
Selects the date format.
Function Sets various function’s options.
Squelch/ATT Select OFF, S-Meter Squelch, ATT Selects to use the S-Meter Squelch or the Attenuator
function for the [SQL] control.
Squelch Delay Short, Long Selects to shorten or lengthen the time until the
squelch opens.
Fan Control Slow, Mid, Fast or Auto Selects the cooling fan control condition.
Dial Speed-UP OFF or ON Turns the dial speed acceleration ON or OFF.
Auto Repeater
*
3
OFF or ON (DUP), ON (DUP,TONE) Turns the Auto Repeater function ON or OFF.
Remote MIC Key Selects the key function for [F-1] or [F-2] on the sup-
plied remote-control microphone.
During RX/Standby [F-1]:BAND/BANK [F-2]:MONITOR Selects the key function to be used while receiving or
in the standby mode.
During TX [F-1]:T-CALL [F-2]:--- Selects the key function to be used while transmit-
ting.
Menu items and Default settings (Continued) ■
*
1
Be sure to insert the SD card into the transceiver before selecting these items.
*
2
The default value may differ, depending on the transceiver version.
*
3
Does not appear, depending on the transceiver version.