New2001
72
7
MENU SCREEN
7
MENU SCREEN
Up/Down MIC Key Selects the key function for [UP] or [DN] on the op-
tional hand microphone.
During RX/Standby [UP]:UP [DN]:DOWN Selects the key function to be used while receiving or
in the standby mode.
During TX [UP]:--- [DN]:--- Selects the key function to be used while transmit-
ting.
One-Touch PTT(Remote MIC) OFF or ON Turns the One-Touch PTT function ON or OFF.
PTT Lock OFF or ON Turns the PTT Lock function ON or OFF.
Busy Lockout OFF or ON Turns the Busy Lockout function ON or OFF.
Time-Out Timer OFF, 1min, 3min, 5min, 10min,
15min or 30min
Selects the Time-Out Timer time options.
Active Band Single or All Allows
continuous frequency selection across all
bands by rotating [DIAL].
MIC Gain 1~2*~4 Sets the microphone sensitivity to suit your prefer-
ence.
Touch Operation (Sub) Main Select or Function Select Sets the touch operation on the SUB band display.
Keyboard Type Ten-key, Full keyboard Selects the keyboard input type to enter a call sign,
memory name, and so on.
Data Speed 4800bps or 9600bps Selects the data transmission speed for low-speed
communication, or between the [DATA] jack and ex-
ternal modules like a GPS receiver, and so on.
CI-V
CI-V Address 01h~8Ch~DFh Sets the transceiver's unique CI-V hexadecimal ad-
dress code.
CI-V Baud Rate 4800, 9600, 19200 or Auto Sets the CI-V code transfer speed.
CI-V Transceive OFF or ON Turns the CI-V Transceive function ON or OFF.
CI-V Bluetooth➝REMOTE
transceive Address
00h~DFh Sets the address to inhibit the external control with
CI-V for the transceiver through the [SP2] (REMOTE)
jack.
* The default value may differ, depending on the transceiver version.
To Next Page
Loading...
