Icom rs-ba1 - To Allow Access from the Internet

1
BEFORE USING REMOTE CONTROL SYSTEM
12
L Only when you congure the remote control system through the Internet, you need the following settings on
your router.
If you congure the remote control system through the Internet, whether you are operating as a Base station or a
Remote station, you need to congure your router to allow access from the Internet.
To allow the access, congure the 3 port numbers used with the Remote Utility (Example: 50001 to 50003).
Ask the router’s manufacturer about how to forward the port.
When connecting to the network through a PC
Service provider
PC
INTERNET
INTERNET
IP Adress:
192.168.0.100
Default Gateway:
192.168.0.1
DNS Server Address:
192.168.0.1
INTERNETINTERNET
IP Adress:
192.168.0.100
IP Adress:
192.168.0.100
Router
MODEM
Router Router
Icom radio
Base station
Remote station
Default Gateway:
192.168.0.1
DNS Server Address:
192.168.0.1
Default Gateway:
192.168.0.1
DNS Server Address:
192.168.0.1
Port numbers
50001 to 50003
Port numbers
50001 to 50003
When connecting to the network directly
IC-7851
IC-7850
IC-7800 (firmware version 3.00 or later)
IC-7700 (firmware version 2.00 or later)
IC-7610
(Radio/Server)
INTERNETINTERNET
IP Adress:
192.168.0.100
Router Router
Remote station
Default Gateway:
192.168.0.1
DNS Server Address:
192.168.0.1
Default Gateway:
192.168.0.1
Port numbers
50001 to 50003
Port numbers
50001 to 50003
IP Adress:
192.168.0.10
■ To allow access from the Internet