Icom rs-ba1 - D the Following Settings Are Automatically Set to the Radio; Dthe Following Settings Are Automatically Set to the Radio

2
WHEN CONNECTING TO THE NETWORK THROUGH A PC
22
■ Radio’s presettings (Continued)
D The following settings are automatically set to the radio
When the RS-BA1’s Remote Controller connects to the radio, and you select the model name on the Connect
Setting screen, the following may be automatically set, depending on the model. When you manually operate the
radio, set these items as desired.
Genre Item Model Action
Function
MAIN/SUB Tranking function IC-7610/
IC-7850 (Firmware version 1.10 or later)/
IC-7851 (Firmware version 1.10 or later)
Automatically set to OFF.
RIT function Radios with the Network function/
IC-7100 (Firmware version 1.10 or later)/
IC-7600 (Firmware version 2.00 or later)
Automatically set to OFF.
∂TX function Radios with the Network function/
IC-7600 (Firmware version 2.00 or later)
Automatically set to OFF.
SSB/CW Synchronous
Tuning
All Automatically set to OFF.
Calibration Marker Radios with Calibration Marker function Automatically set to OFF.
VOX function All Automatically set to OFF.
Scan function All Automatically cancel the scan.
RTTY lter IC-746PRO*/IC-756PROIII*/IC-7400* Automatically set to OFF.
Twin Peak Filter IC-746PRO*/IC-756PROIII*/IC-7400* Automatically set to OFF.
Display
Dualwatch function Radios with the Dualwatch function Automatically set to OFF.
SUB band IC-9100 Automatically set to OFF.
Memory channel/Call
channel
All Automatically set to the VFO mode.
Operating
mode
DR (D-STAR® REPEATER)
mode
Radios with the DV mode Automatically set to OFF.
Satellite mode Radios with the Satellite mode Automatically set to OFF.
CI-V
CI-V transceive All Automatically set to ON.
CI-V 731 Mode IC-746PRO*/IC-756PROIII*/IC-7400* Automatically set to OFF.
* Operation on models without a USB connection cannot be guaranteed.