Icom rs-ba1 - Connection Setting

4
SETTINGS FOR A REMOTE STATION PC
64
■ Connection setting
When the connection to the Server has succeeded, the radios that are physically connected to the Server are
displayed on the Radio List screen of the Remote station’s Remote Utility.
Select a radio from the list, then connect it to the network using the Remote Utility.
You have to congure the network audio quality and devices to connect.
L To control the radio, connect to the radio using the Control software.
NOTE:
If the connection setting is nished, you can simply connect to the radio by selecting it in the Radio List screen
and then clicking <Connect>.
1. Click the <Radio List> tab.
2. Select a radio.
3. Click <Settings>.
L Radios that are “<<Connected>>” or “Ofine,” the
Connection Setting cannot be changed.
1Click
2Select
3Click