ii
ABOUT THIS INSTRUCTION MANUAL
To start using the RS-BA1, read this instruction manual in the following order.
PREFACE
OVERVIEW OF THE RS-BA1
ABOUT THE COMMUNICATION IN THE REMOTE CONTROL SYSTEM
1. BEFORE USING REMOTE CONTROL SYSTEM (p. 1 to 14)
When using a transceiver without the Server PC
function.
When using one of the following transceivers with
the Server PC function. (As of August 2017)
• IC-7851
• IC-7850
• IC-7800 (Firmware version 3.00 or later)
• IC-7700 (Firmware version 2.00 or later)
• IC-7610
3. WHEN CONNECTING TO THE NETWORK
DIRECTLY
2. WHEN CONNECTING TO THE NETWORK
THROUGH A PC
4. SETTING FOR A REMOTE STATION PC (p. 58 to 70)
5. REMOTE CONTROLLER’S BASIC OPERATION (p. 71 to 76)
6. TROUBLESHOOTING (p. 77 to 83)
(p. i to iii)
(p. iv)
(p. v)
(p. 15 to 44) (p. 45 to 57)
To Next Page
Loading...