1
BEFORE USING REMOTE CONTROL SYSTEM
14
When connecting to the network directly
Radio setting (Continued)
• For the IC-7610
1. Push [MENU] to display the MENU screen.
2. Touch [SET] to enter the Set mode.
3. Touch [Network].
4. Touch “DHCP.”
5. Touch “OFF.”
6. Touch “IP Address.”
7. Enter the fixed IP address.
(Example: 192.168.0.10)
Enter
8. Touch “Default Gateway.”
9. Set the default gateway of the router.
(Example: 192.168.0.1)
Enter
10. Reboot the radio.
The settings will take effect after rebooting.
■ To allow access from the Internet
Router setting
Please refer to your router’s manual for details of how
to congure the settings.
To Next Page
Loading...