Icom rs-ba1 - Page 53

2
WHEN CONNECTING TO THE NETWORK THROUGH A PC
25
■ Radio registration
D To register a radio (Continued)
1
Open the Register a Radio screen.
Click <Add> to display the Register a Radio
screen.
Click
2
Select the purpose of use of the radio.
L If you register a radio by the Setup Wizard
screen, this screen is not displayed.
1. Select “Accessible from other PCs.
L If you select “Only accessible from this PC,”
the radio is not accessible from other PCs.
2. Click <Next>>.
1Select
2Click
3
Select a Radio.
1. Select a Radio that you want to add.
• USB
Select if the radio is connected to the PC using
a USB cable.
Select the connected radio from the drop-down
list.
LIf the radio is not listed, click the <Search>
button.
• Manual
Select if the radio is connected to the PC using
other than a USB cable.
Select the connected radio from the drop-down
list.
2. Click <Next>>.
1Select
2Click