IDEC FC6A-C16K1CE

FC6A S ERIES M ICRO S MART A LL - IN -O NE T YPE C OMMUNICATION M ANUAL FC9Y-B1730 6-25
6: M ODBUS C OMMUNICATION
Programming WindLDR (Modbus TCP Server)
In order to use Modbus TCP server, configure the Modbus TCP server in the Function Area Settings dialog box and then
download the user program to the FC6A Series MicroSmart.
1. From the WindLDR menu bar, select Configuration > Connection Settings.
The Function Area Settings dialog box appears.
2. Select Modbus TCP Server as the communication mode for connection 1.
The Modbus TCP Server dialog box appears.
3. Configure the parameters and click on OK button.
Note: For details about each parameter, see the following page.
4. Download the user program to the FC6A Series MicroSmart.
Programming for the Modbus TCP server is complete.