4: M
AINTENANCE
C
OMMUNICATION
4-12 FC6A S
ERIES
M
ICRO
S
MART
A
LL
-
IN
-O
NE
T
YPE
C
OMMUNICATION
M
ANUAL
FC9Y-B1730
3. Set the parameters to match the communication format used by the computer or operator interface.
* Values not in parentheses are the default settings.
4. Click OK.
This concludes configuring the maintenance communications settings.
Baud Rate (bps) : 115200 bps (1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200)
Data Bits : 7 (7 or 8)
Parity : Even (None, Even, Odd)
Stop Bit : 1 (1 or 2)
Receive Timeout : 500 ms (10 ms to 2550 ms)
Slave Number : 0 (0 to 31)
Slave numbers are specified by constants or data registers.
Type Details
Constant Set within the range of 0 to 31
Data Register
Store the slave numbers 0 to 31 in the following special data registers
Port 1: D8100
Port 2: D8102
Port 3: D8103
To Next Page
Loading...
Need help?
General
