The printer transmits the status without confirming whether the host computer
can receive data.
The printer executes this command upon receiving it.
This command is ony available for serial port printer. The printer executes this
command upon receiving it any status.
n = 1: Printer status
Bit 0/1 Hex Decimal Function
0 0 00 0 Fixed to “0”.
1 1 02 2 Fixed to “1”.
2 0 00 0 One or two drawer open
1 04 4 Two drawers closed
3 0 00 0 On-line
1 08 8 Off-line
4 1 10 16 Fixed to “1”.
5,6 Undefined.
7 0 00 00 Fixed to “0”.
n = 2: Off-line status
Bit 0/1 Hex Decimal Function
0 0 00 0 Fixed to “0”
1 1 02 2 Fixed to “1”.
2 0 00 0 Cover is closed.
1 04 4 Cover is open.
3 0 00 0 Not press FEED button.
1 08 8 press FEED button
4 1 10 16 Fixed to “1”
5 0 00 0 No paper-end
1 20 32 Paper end
6 0 00 0 No error.
1 40 64 Error occurs.
7 0 00 0 Fixed to “0”
n = 3: Error status
Bit 0/1 Hex Decimal Function
0 0 00 0 Fixed to “0”
1 1 02 2 Fixed to “1”
2 - - - Undefined.
3 0 00 0 No auto-cutter error.
1 08 8 Auto-cutter error occurs.
4 1 10 16 Fixed to “1”
5 0 00 0 No unrecoverable error.
1 20 32 Unrecoverable error occurs.
To Next Page
Loading...
