idp Smart Series - 3.2.1.2. Advanced setup

48
Pic.99 Advanced Setup
3.2.1.2. Advanced s
etup
Reset Default Values: Reset to default.
Color Correction:
You can correct gamma for
colors. You need to use CardPrinterSetup to adjust
color densities.
Resin Black (K) Processing: Set criteria
for resin
black processing.
Text:
to set density criteria for extracting black
objects
Dot: to set density criteria for extracting black dots
Threshold: to set density criteria on dithering
Dithering Degree: to set sharpness on dithering
Extra Controls :
Edge Size:
to set not printed area in case of not
using Edge-To-Edge
Eject Card: to set if eject a card after printing
Erase
Density : to set erase density for
SMART-30 R Erase
Sharpening: to calibrate image sharpened
Flip Front:
to set printed direction of image on
front side.
Flip Back:
to set printed direction of image on
back side.
Magnetic Strip Encoding Method:
to set magnetic
stripe encoding method for each track
Normal: to encode on LoCo Card forwards
Reverse: to encode on LoCo Card backwards
Bit: to encode on LoCo Card in Bit
HiCo Normal: to encode on HiCo Card forwards
HiCo Reverse:
to encode on HiCo Card
backwards
HiCo Bit: to encode on HiCo Card in Bit
Magnetic Card Flip R/W:
to set back side image
printing when magnetic encoding
Magnetic Simple Encoding:
Set fast encoding
and printing
Magnetic Auto Encoding: Set auto coercivity.
Magnetic Encoding Ballys mode:
Set Ballys
mode
Manual Magnetic Stripe encoding:
to put in data on
magnetic stripe manually
Not Use: not to use magnetic stripe encoding
Encoding and Printing:
to print after magnetic
stripe encoding
Encoding or Laminating only:
encoding
magnetic or laminating. without printing
Text String Magnetic Stripe Encoding:
Set special
marker for text string magnetic encoding.
Start Track 1: Start marker of magnetic track1
Start Track 2: Start marker of magnetic track2
Start Track 3: Start marker of magnetic track3
End Track 1: End marker of magnetic track1
End Track 2: End marker of magnetic track2
End Track 3: End marker of magnetic track3
Coercivity: LoCo, HiCo (Lo/Hi)
Encoding Type: Set encoding type (ISO/JIS)