idp SOLID-310D - Advanced Driver Configuration Settings

29
3.2. Advanced Options
To change the detailed configuration, In the ‘Layout’ tab shown, Please click
“Advanced…” shown on the bottom of the ‘Layout’ tab of the ‘Preferences’.
 Print Quality : To the print quality(DPI). You can select one among 300 x 300 dpi, 300 x
600 dpi and 300 x1200 dpi.
- 300 x 300 dpi : Supported the Color & Mono printing
- 300 x 600 dpi : Supported the Mono printing only.
- 300 x 1200 dpi : Supported the Mono printing only.
Default is 300 x 300 dpi.
 Reset Default Values: Reset to default.
 Color Correction: You can correct gamma for colors. You need to use
CardPrinterConfig to adjust color densities.
- Main [-100:100] : Correct gamma for all panels
- Yellow [-100:100] : Correct gamma for yellow panel
- Magenta [-100:100] : Correct gamma for magenta panel
- Cyan [-100:100] : Correct gamma for cyan panel
- Black [-100:100] : Correct gamma for black panel
- Overlay [-100:100] : Correct gamma for overlay panel
 Position Processing: Set criteria for resin black processing.
- Color [-32:32]: to set the position of color panels
- Mono [-32:32]: to set the position of resin or mono panel
- Overlay [-32:32]: to set the position of overlay panel