To Next Page

To Previous Page

124

IDS X-Series Training v2.7

3. Double click on the IDSwift software icon to run the software and login. Default user name is “admin”

and password is “admin”.

4. Open the client window.

5. Choose the client and then open the client.

Table of Contents3
X-Series V2.70 Features4
- Kick Start Jumper5
- Default Button & 3. Panel Status LED5
Hardware5
- Panel Status LED6
- Serial Output6
- Programmable Outputs6
- X-Series Connectors7
- AC Power7
- Tx7
- Aux 12V7
- Telephone Connections8
- Panic Zone8
- Zones8
- Onboard Expander Connection9
- Keypad Bus9
- IDS X64 – Wired 8 Zone Expander Module9
- Wired Expander Trouble LED10
- Wired 8 Zone Expander Module Example10
- IDS X64 – 8 Zone Smart Expander Module10
- IDS Smart Power Supply Module11
- IDS X-Series Output Expander Module12
- IDS Bus Isolator13
- IDS X-Series Keypads13
- Keypad Enrollment13
- Remote Receiver and Connections14
- Bus LED14
- Function LED14
- Wireless Integration15
- Wireless Zone Expander Bus Connection15
- Xwave Wireless Expander15
- Wireless Expander DIP Switch Operation16
- Wireless Expander LED Operation16
- Xwave Output Configuration16
- Xwave Leds16
- I/O Module17
- LED Status17
- Leds17
- Interface18
- X-Series Axess18
- Reader19
- Reader Feedback19
- Wiring20
- Integrated Reader20
Entering Data21
- Reading Numerical Values Stored in Locations Via an LED Keypad22
- Reading Time Locations Via an LED Keypad22
- Installer Mode23
- Location Definitions23
- Programming Standard Locations23
Programming23
- Programming Extended Locations24
- Programming Bitmap Locations24
- Sub-Location Method24
- String Method24
- Location 1 to 8: Zone Type25
- Location Type: Extended Location25
- Location 0: Defaults25
Locations25
- Zone Types and Their Values26
- Zone Programming Example27
- Location 9: IDS Smart Power Supply Module Trouble Display28
- Location 10: Zone Shutdown Count28
- Location 11: Programmable Zone Loop Response Time28
Global Settings28
- Location Type: Standard29
- Location 13: Cross-Zone Delay Count29
- Location 12: Cross-Zone Delay Time29
- Location 14: Global Options30
- Location Type: Bitmap30
- Location 15: AC Fail / Restore Reporting30
- Location 16: Trouble Display31
- Location 17: Siren Time out32
- Location 18: Siren Delay32
- Location19: Extra Global Options32
- Location 20: Keypad Lockout Count32
- Location 23: User, Installer, Maintenance Code Number of Digits33
- Location 24: Account Code Number of Digits33
- Location 22: Keypad Sleep Delay33
- Location 21: Keypad Lockout Time33
- Location 29: Day of the Week to End Daylight Savings34
- Location 26: Day of the Week to Start Daylight Savings34
- Location 28: Month to End Daylight Savings34
- Location 27: Week of the Month to Start Daylight Savings34
- Location 32: Auto Test Interval35
- Location 33: Auto Test Time35
- Location 34: Download Code Default Disable35
Advanced Miscellaneous Settings35
- Location 36: Zone Status Verify Time36
- Location 37: Zone Status Verify Count36
- Location 40: Serial Communication Format36
Communication Settings36
- Location 45: Communication Delay37
- Location 46: Reporting Communication Options37
- Location 47: Number of Dial Attempts37
- Location 48: Download Options38
- Location 49: Number of Rings to Answer38
- Location 51 to 54: Entering a Telephone Number38
- Location 55: Serial Reporting Telephone Number38
- Location 71 to 78: Secondary Account Codes39
- Location 56: Time between Dial Attempts39
- Location 61 to 68: Primary Account Codes Per Partition39
- Location 101 to 164: Setting Zone Properties40
Zone Properties40
- Arm on no Movement41
- Location 165: no Movement Auto Arm Time out41
- Location 166: Auto Arm Start Time41
Auto Arm and Auto Alarm41
- Location 169: no Movement Medical Alarm Start Time42
- Location 170: no Movement Medical Alarm Stop Time42
- Auto Arm and Disarm42
- Location 180: Auto Arm42
- Location 181 to 188: Days to Auto Arm / Disarm43
- Location 189: Auto Disarm43
- Location 190: Auto Arm Delay43
Security Options43
- Location 199: Maintenance Code44
- Location 198: Download Code44
- Location 197: Installer Code44
- Classic Keypad Leds45
- Location 201 to 208: Placing Zones into a Partition45
- Curve Keypad Leds45
Partition Options45
- Location 211 to 218: Partition Configuration46
- Locations 221 to 228: Extra Partition Options47
- Location 230: Exit Delay47
- Location 231: Primary Entry Delay48
- Location 232: Secondary Entry Delay48
- Location 240: Keypad and Partitions48
Keypad Configuration48
- Location 241: Keypad Display Start Zone49
- Location 242: Keypad Zone49
- Location 243: View Keypad ID50
- Location 251 to 258: Keypad Options50
- Location 259: IDS Axess Configuration51
- Sub-Location 1: Enrol Door51
X-Series Axess51
- Sub-Location 4: Configure Advanced Door Options52
- Sub-Location 3: Configure Door Options52
- Sub-Location 2: Remove Door52
- Location 260: Wireless Configuration53
- LED Keypad Instructions53
- LCD Keypad Instructions53
X-Series Wireless53
- Sub-Location 1: Add Wireless Detector54
- Using an LED Keypad54
- Sub-Location 2: Delete Wireless Detector55
- Use an LED Keypad55
- Using an LCD Keypad55
- Location 261 to 264 Stay Zone Reporting Codes56
- Sub-Location 3: Signal Power of Receiver56
- Sub-Location 4: Supervision Monitoring56
Reporting Codes56
- Location 300 Global Reporting57
- Location 301 Global Reporting57
- Location 302 Global Reporting57
- Location 303 Global Reporting58
- Location 304 to 335: Zone Reporting58
- Location 342 to 373: User Reporting Codes59
- Location 374: Quick Close Reporting Codes Per Partition59
- Location 336 to 340: Partition Reporting Codes59
- Extending Contact ID Zone Reporting59
- PGM Output Address60
Triggering Outputs60
- PGM Output Actions61
- Location 380: Clear Onboard Programmable Outputs on Disarm61
- Clear Zone Expander Programmable Outputs on Disarm61
- Clear Output Expander Programmable Outputs on Disarm61
- Partition Dependant Events62
- Location 415 to 422: Zone Triggered Outputs63
- Zone Triggered Outputs63
- Location Type: Extended64
- Globally Triggered Outputs64
- Configuring Pulse Length65
- Location 428: Onboard Outputs Pulse Length65
- Location 429 to 434: Zone Expander Outputs Pulse Length65
- Location 435 to 436: Output Expander Outputs Pulse Length66
- Location 437: Keypad Outputs Pulse Length66
- Scheduled Output on Times66
- Location 438: Onboard Output on Time66
- Location 457: Keypad Output off Time67
- Location 447: Keypad Output on Time67
- Location 448: Onboard Output off Time67
- Scheduled Output off Times67
- Location 458 to 498: Output on / off Days68
- Manually Triggered68
- Location 501 to 564 Global Split Reporting68
Event Reporting68
- Location 571 Global Split Reporting69
- Location 572 Global Split Reporting69
- Location 574 Global Split Reporting70
- Location 573 Global Split Reporting70
- Location 575 Global Split Reporting71
- Location 581 - 588 Partition Split Reporting71
- Location 600 - 616 Voice Module Reporting Telephone Numbers72
- Location 617: User Reporting Codes72
- Location 618: User Split Reporting72
- I/O Module Programmable Outputs on Disarm73
- I/O Module Outputs Pulse Length73
- I/O Module Output on Time73
- I/O Module Output on / off Days73
Appendix74
Contact ID Zone Reporting75
- Global Options77
- Communication Format77
- Reporting Option77
- Primary Telephone Numbers77
Location 0 Option 5 Default Changes77
- Location 211 – 218 Partition Arm Options78
- Close Reporting Codes78
- Stay Close Reporting78
- Zone Split Reporting78
- Global Split Reporting 179
- Location 600 – 616 Voice Module Phone Numbers80
- Location 14 Global Options80
Location 0 Option 6 Default Changes80
Location 46 Reporting Options81
User Menu84
Types of Keypads85
Keypad Key Descriptions85
- Selecting Keypad Tone and Volumes86
- How to Away Arm the System87
- Away Arm87
- Stay Arm87
Standard User Functions87
- Stay Arm Profiles Example88
- How to Enable Stay Arm Profiles88
- Selection Method88
- Stay Profile Menu88
- Bypassing Zones89
- How to Setup Buzz Zones89
- Chime Zone89
- Buzz Zone89
- Alarm Memory90
- User Codes90
- Violated Zone90
Standard Master User Functions90
- Option 0 - Adding User Codes91
- Option 1 - Changing a User Code91
- Option 2 - Deleting a User Code91
- Option 3 - Add a User Code to a Specific Slot91
- Option 10 - Editing User Code Properties92
- Option 5 - View a User Codes Slot Number92
- Option 4 - Delete a User Code Via Slot Number92
- User Outputs93
- User Partition Allocation93
- Allow Installer Code Access93
- Wireless Device Battery Check94
- Default Button Assignment94
- Bi-Directional Remote Identification94
Bi-Directional Remote Transmitters94
- Remote Transmitter LED Colour Meaning95
- Remote Transmitter LED95
- Querying the X-Series95
- Defaulting the Bi-Directional Remote Transmitter95
- Edit Bi-Directional Remote Buttons96
- To Change the Button Functions96
- Adding Bi-Directional Remotes96
- Deleting Bi-Directional Remotes97
- Walk Test97
- To Enter a Device into Walk Test Mode97
- Adding Remotes - Standard Method98
Standard Remote Transmitters98
- IDS Remote Transmitter Button Number Assignment99
- Adding Remotes - Advanced Method99
- Deleting Remote Transmitters99
- Button Properties100
- Relay Properties100
- Relay Pulse Time100
- Defaulting the Remote Receiver101
- Zone Naming Using an LCD Keypad101
- Language101
- Delete Access Tags by Typing a Tag Number102
- Adding Access Tags by Swiping a Tag102
- Adding Access Tags by Typing a Tag Number102
X-Series Axess102
- Delete Access Tags by Swiping a Tag103
- View Transactions103
Setting the Time and Date103
- Manual Auto Test104
- Changing Partitions104
- Changing Stay Profiles104
Master Mode Menu104
Changing between Alphanumeric Mode and LED Simulation Mode105
Alarm Memory105
Partition Menu on LCD Keypads105
Trouble Conditions106
Quick Guide107
X-SMS Module108
- Introduction109
- Installation109
- X-SMS Connection to an X-Series Panel109
- Jumper 1110
- Status Leds110
- GSM Connect Status111
- Location 196111
- Command Structure111
- Basic Programming111
- Adding Phone Numbers112
- Reporting112
- All Reporting Commands113
- SMS Threshold113
- To Change Reporting to Full You will Use the Following Information113
- All Arm/Disarm Commands114
- Bypass/Unbypass114
- Arm/Disarm114
- Panel Status115
- Command Table116
Voice Module118
- Hardware Installation119
- User Initiated Communication120
- User Menu120
- Menu Details120
- Status Report120
- Exit the Call or a Menu121
- Siren121
- X-Series Alarm Panel Programming121
- Bypassing / Un-Bypassing121
- User Codes (V2.41 and Above)122
- Telephone Numbers122
- To Add a Cell Phone to a Location122
- To Change or Add a User Code’s Partition122
- Firmware Upgrading123
Connecting Directly to the X-Series System Board with the Panel Interface Device123

Other manuals for IDS X Series

User Manual32 pages

Installer Manual72 pages

Quick Start Guide4 pages

Questions and Answers:

Need help?

Do you have a question about the IDS X Series and is the answer not in the manual?

IDS X Series Specifications

General

Key Type	Tactile
Backlight	Yes
Operating Voltage	12VDC
Weight	150g
Operating Temperature	-10°C to +55°C

Related product manuals

IDS 805

48 pages

IDS IDS805

29 pages

IDS LCD Digital Keypad

32 pages

IDS X Series Training Manual

Table of Contents

Other manuals for IDS X Series

Questions and Answers:

IDS X Series Specifications

Related product manuals