9
UK
• P = measured pressure;
P‘ = modified measured value
• CP1 = calibration point 1;
CP1‘ = modified measured value for
CP1
• CP2 = calibration point 2;
• 1 = curve of measured values at
factory setting
• 2 = curve of measured values after
calibration
• P = measured pressure;
P‘ = modified measured value
• CP1 = calibration point 1;
CP2 = calibration point 2;
CP2‘ = modified measured value for
CP2
• 1 = curve of measured values at
factory setting
• 2 = curve of measured values after
calibration
• P = measured pressure;
P‘ = modified measured value
• CP1 = calibration point 1;
CP1‘ = modified measured value for
CP1
• CP2 = calibration point 2;
CP2‘ = modified measured value for
CP2
• 1 = curve of measured values at
factory setting
• 2 = curve of measured values after
calibration
To Next Page
Loading...
