Samand
168
Adjustment and replacement
Front fender
To remove
1 Raise vehicle and secure.
2 Remove road wheel.
3 Remove wheel arch liners (previous page).
4 Remove side repeater lamp and disconnect.
5 Remove 2 bolts from cooling pack panel.
6 Open front door to access lower A pillar and
remove 2 bolts.
7 Remove front fixing bolts.
8 Remove 3 bolts from top of fender and remove
fender.
To refit
Refitting is a reversal of the removal procedure. Tighten
road wheel nuts to 85Nm.
To Next Page
Loading...
Need help?
General
