Samand
4
Technical data
Body Dimensions
Measurements, upper body
These measurements are suitable for determining if the car should be mounted in an alignment bench.
Item Dimension (mm) Description
1 4128.2 Total length (Body less closures)
2 814.8 FRT Fender fixing hole LH, Hole for air intake clips LH
3 889.5 FRT Fender fixing hole LH, Hole for air intake clips (Middle)
4 1338 FRT Fender fixing hole LH, Hole for air intake clips RH
5 1220 FRT Fender fixing hole LH & RH
6 486.1 Hole for FRT suspension cap LH, Hole for air intake clips (Middle)
7 1128.8 Hole for FRT suspension cap LH & RH
8 1335.3 Lower section of A pillar, Upper section of A pillar
9 1429 Distance between sill INR section LH & RH
To Next Page
Loading...
