Ikco XU7JPL3 - Replace Part Front Side Member and Front Wing Inner Panel Side Panel

77
Samand
Adjustment and replacement
W78R220
1
1
1
W78R221
W78R222
3
20
175
2
Replacing a part front side member and a front
wing inner panel side panel.
Preliminary operations
Remove:
- Front wing
 Front panel
 Half front floor
1 Prepare new part by drilling out 8mm holes for
later plug welding.
2 Cut out the front wing inner panel, side panel at
the same angle as the end piece.
3 Cut vertically (20 mm) from the lower point
(provisional cut).