Samand 1.8i
Areas of the body that are most vulnerable in the event of a collision are reinforced. In addition, some of these
reinforcements are manufactured in high-strength steel. The circled areas are especially vulnerable and require
extreme care during bodywork repair.
Important
Body reinforcement may only be cut and joined if this is stated in the method description. Unless otherwise stated, a
damaged reinforcement detail must unconditionally be replaced with a new one.
1 Reinforcement A pillar to fender inner 4 Panel reinforcement front hinge A pillar
2 Panel A post upper inner 5 Sill inner
3 Reinforcement B pillar
To Next Page
