Samand
180
Adjustment and replacement
4 Remove the upper tool to allow movement of the
connecting link.
5 Pull the lock towards the outside of vehicle.
6 Protect the edges of the lock aperture.
7 Press down the interior lock button.
8 Remove the key lock by pivoting it clockwise and
tilt it up to disengage it from the link tool.
To refit
Refitting is a reversal of the removal procedure.
Important:
Press the lock firmly into contact with the
door and lightly engage the top and bottom of lock
before pulling fully towards you. Ensure the lock is fully
retained by clip before releasing tools.
To Next Page
Loading...
Need help?
General
