Ikco XU7JPL3 - Page 90

2 7
26
25
27
W78R252
W78R253
3 1
30
29
28
W78R254
33
3 4
35
32
Samand
88
Adjustment and replacement
Brush on smooth mastic:
25 To the rear of the front floor cross member on the
front floor and on the side member centre part.
26 To the side member rear joint and to the side
member centre part.
27 To the front floor.
Apply a coat of anti-chip compound to:
28 The front and rear of the front floor cross member,
29 The side member centre part,
30 The side member rear joint,
31 The inner sill.
Spray liquid wax inside:
32 The front and rear of the front floor cross member
33 The side member centre part
34 The side member rear joint
35 The inner sill.